Cold rooms – Cold Depot and Cold Room
Cold Room Design ; wherein the current depending on the product to be stored preferred storage form.
Cold storage, it must be conditioned with standard between -5 ° C and + 5 ° C.
Retention periods; According to product quality and varies depending on the storage time.
If the proper temperature level is supplied, the stored items will be maintained without the risk of spoilage during storage periods.
Cold Storage Features
Chamber wall, ceiling and floor portions will be formed of polyurethane sandwich panels.
Metrekareli room floor in large warehouses; XPS floor insulation and reinforced concrete poured over iron is maintained.
Our panel; Between the two sheets of 42kg / m³ (+ – 2%) is a polyurethane outer surfaces of hygienic filling density.
Both surfaces of the wall and ceiling panels painted with the 0.50 mm thick polyester based paint RAL9002 color code
is produced from hot dip galvanized.
Room on the ground, and having specific surface resistant against sliding plywood panels coated substrate is used.
Panels made from the same material as the panel surfaces on the inner and outer corner joint special accessories are used.
Our panel; Interlocking female – male plug and locked. It can be disassembled if necessary.
The room’s lighting systems to illuminate and cold resistant, is used as a special standard fixtures.
Cold Room Door Features
The doors, high-quality, convenient and has an aesthetic structure.
Hinged doors are manufactured in standard 90 x 190 cm clear bore.
Sliding doors are manufactured as standard type 200 x 250 cm net passing.
All our doors can be locked from the outside a structure. Hinges are rising type.
Even if the door is locked and available phosphorus anti-panic lever that can be opened from the inside.
Our hair the door surface is polyester coated on galvanized coating standards.
The door leaf, between the two sheets of 42kg / m³ (+ – 2%) density polyurethane is injected
in the door jamb, aluminum and silicon based rubber engaged with the curved profile is used.
Chillers Features
Cooling Our group is CE certified.
Our devices are manufactured fully in accordance with types of open or closed type design to withstand the toughest outdoor conditions.
All of our equipment environmentally friendly R-404A (CFC Free) refrigerant is used.
All of our equipment with world-class European supplies of high-quality European goods Compressors are used.
Condensers used are specially designed and produced. Cold rooms would be built taking into consideration local conditions condensation + 45 ° C is selected.
Sound level of the outdoor unit silent operation of our devices is ensured through high-quality low-speed fans used comply with European Norms.
Through automatic fan control feature in our device it works automatically and stops the condenser fans.
Our device to be low to ensure long life of the equipment used and the level of security and is equipped with a high pressure control and protection systems.
High precision to adjust the room temperature to the desired value and high quality digital control system.
Our device is fully automatic digital and manual defrost is microprocessor controlled with 29 different parameters.
